Partners Inventory Home | Manufacturer Search | Catagory Search | Item Search
Category Search Page
All Listings > 


sort by: best match | lowest to highest | highest to lowest
Used Machine Listings
 
UNIQUE - 280-4-60 UNIQUE CLAMP
Print Item Email this machine to a friend
List Price: $4,000.00
Condition: CLEANED/CHECKED
Machine Stock Number: 1709
Member Stock Number: CF260011186
Serial Number:
DD: D

Description:
1-used UNIQUE model 280-4-60 cabinet door and frame clamp. With 4 ft. x 8 ft. capacity. With six (6) ea. 2-1/2" diameter air clamping cylinders. With foot pedal. Clamp table is mounted on a 60 degree angle for ease of use. Cleaned and checked.
Click for Large Image
 Print Item

Used National Machine Listings
 
RITTER - R-275 4'X8' DOOR/FACE FRAME ASSEMBLY TABLE
Print Item Email this machine to a friend
List Price: $3,750.00
Condition: CLEANED/CHECKED
Machine Stock Number: 214070
Member Stock Number: CF030011251
Serial Number: 545
DD: D

Description:
Ritter model R-275, 4 x 8 door/face frame assembly table, SN 545, year 1997, 4 x 8 steel table with holes, rolling hold down beam with three vertical clamp cylinders, four horizontal clamp cylinders, steel base, cleaned and checked.
Click for Large Image
 Print Item

 
RFS-PROTECH - PT-7 RFS PROTECH MODEL PI-7 RADIUS FORMING CLAMP
Print Item Email this machine to a friend
2002
List Price: $25,000.00
Condition: ATFS
Machine Stock Number: 10961
Member Stock Number: CF070008676
Serial Number: HMC10961
DD: D

Description:
Used RFS ProTech Model PT-7 Radius Forming Clamp. ProTech radius formers are the modern way to fabricate curved laminates such as arched headers and radiused mouldings for windows and doors. Utilizing their patented technology they eliminate the traditional method of building and storing wooden forms. The PT-7 radius former uses a series of machined tails supporting dual sets of aluminum arms, which are adjusted to define the pattern to be fabricated. The provided computer program is used to set-up parameters. The software guides the user through a series of questions (shape diameter, springback, etc) that geometrically define the pattern. The software then calculates the exact position for each aluminum arm and generates a printout to aid the operator in manually positioning the arms. The laminates (veneers) are clamped to the form arms with a series of 32 specially designed pnuematic clamps. Compressed air at presssures up to 150 PSI is connected to the clamp via a quick disconnect. Specifications: Maximum part length is 120" Standard part height of 54" Maximum Width: 7" Maximum part thickness: 4-1/2" Approx. Year Mfg: 2002 New Replacement cost $40,000
Click for Large Image
 Print Item

Displaying 3 Listing(s).